High Density Fiber Cement Cladding Boards Building Materials With A1 Fireproof Class

Product Introduction:

It is a stable performance and light weight building &decoration board used cement as major
and natural fiber reinforced,with the process of pulping,emulsion,forming,pressing,autoclaving,drying and surface treatment.With the sanding surface,thickness uniformity is better and grain is clearer.And because of the cement,the strength is higher,and waterproof performance is much better.

Product Application:

Exterior wall cladding; interior (toilet) partition;sound absorption ceiling; curtain wall scale board;composite wall panel;outdoor billboard; thermal baffle;floor tiles.
Fiber cement board is extensively used in office building,hotel,hospital,facatory building,school,villa theatre and other kinds of art building.

Specification:

(1). Thickness: 4-25mm
(2). Standard size: 1220*2440mm or 1200*2400mm
(3). Note: other specification is available

Packing:
1. Strong wooden pallet(Standard Export Package)
2. Corner protective
3. Plastic Film
4. Protect Board

Partition Installing Method:
1. Galvanized Metal Frame
a.The top and bottom keels are fixed respectively top floor and on floor with expansion bolts.
b.The vertical keel should be aligned well according to the requirement (generally being 612 mm) with
laterally supporting keel installed.

2. Board Material Package Fixed
a. Cutting the board material to the dimensions needed (about 10mm lower than wall height)
b. Board material is fixed on keel in anchoring seam way with tapping screw: the interval of tapping screw is generally
about 200~250mm with screws sinking 0.5mm under the board face.
c. The expansion seam of about 4mm between boards should be kept.
d. The shrouding should be fixed from the middle to the four sides and cannot be operated at multipoint simultaneously
to avoid generating inner stress to make board material bucking.
e. Before board being packaged and fixed, depending the needs, glass cotton or rock cotton can be filled.